√天堂资源在线中文8在线最新版,国产成人无码免费视频麻豆,18禁黄久久久aaa片,精品三级久久久久电影网

精衛電子是臺州專業生產無刷電機控制器,與各大知名廠家配套,中國立馬,綠佳,富士達,獅龍,寶島,菲利普,奔寶,千里馬,綠嬌,臺隆,等

電動車無刷控制器功能介紹
一：主要參數
15管無刷大功率控制器  

額定電壓：24V-80V 

電    流：20-33A±1A 

電壓可配：24V/36V/48V/60V/64V/72V/80V
功能實現：180W/250W/350W/450W/500W/600W/800W/1000W/1200W/1500W/1800W
功能特點：采用美國進口MCU主控芯片，驅動性和穩定性強，無刷電機啟動運行噪音低轉把電壓：1.1-4.2V/1.1-6.5V
可選功能：柔性E-ABS、E-ABS剎車、巡航、三檔變速、三擋儀表顯示
、自充電、防盜、零功耗鎖電機、一線通、堵轉保護、功率管動態保護

可根據客戶需求定做各種型號控制器

二:主要功能介紹
1. 自動巡航(可選)
 電動車恒速運行8秒控制器自動進入巡航狀態，此后如調速或剎車則自動取消。
2.  三檔變速功能
   一般分為三種：低、中、高速，（也有叫普通、超車、爬坡的）是爭對不同情況下可供選擇的三種行車模式。
3. 飛車保護
 控制器能對轉把及線路實施實時監控，發現故障能自動保護，從而保護騎行者的安全。  
4. 欠壓保護功能
   控制器能實時檢測電池電壓，當電壓降到規定值時，便自動切斷電機的供電回路，從而有效保護電瓶。
5 過流保護功能
  當電機電流達到限流值時，控制器自動限流，從而有效保護電瓶、電機及控制器自身。
6 剎車斷電功能
 當用戶進行制動時，控制器能接受制動信號，并立即切斷電機的供電回路，從而保護騎行者的安全。
7.  一線通

  能為液晶儀表提供速度、充電等實時信號數據等。
其他功能(根據用戶要求可增加)

主要采用原裝進口MCU并以程序來實現控制和保護電動車的電機、電池，使電動車驅動系統工作在最佳狀態，從而提高產品的可靠性和使用壽命；采用霍爾電子無級調速系統，具有欠壓保護、堵轉保護、軟啟動、剎車自動斷電等功能，可靠地對電機和電池進行保護，確保電動車使用以及安全；產品貼片元件安裝、抗干擾，耐震動、耐腐蝕?？刂乒δ芡晟?、性能優越、可靠性高、穩定性好。
Used mainly imported original MCU and procedures to achieve the control and protection of electric motor vehicles, batteries, make electric cars driven system in the best condition,thus improving the reliability of the product and service life; Hall electronic variable speed system, with undervoltage protection, blocking protection, soft start, automatic braking power outages and other functions, reliable motor and batteries to protect and ensure the use of electric vehicles and security; Product placement component installation, interference. Shock resistance, and corrosion. Control functions done in superior performance, high reliability, stability.

雙模一鍵通 [無意識轉換]

60°(120°)相位電機，當霍爾壞掉或霍爾線掉落時，自動進入雙模狀態(即無霍爾狀態)并保持正常行駛。

     當調速把出現故障或調速線掉落時或剎把失靈處于剎車狀態時重新打開電門按下一鍵通按鈕，電機速度可保持正常速度的30%-40%速度行駛，從而不會引起車輛拋錨時的無助。

Dual-mode one key (unconscious conversion)

60° (120°) phase motor, when hall is damaged or its wire is off, it will enter dual-mode state (hall-free state) and keep proper drive automatically.

Press one key button when the speed regulating handle can not work or its wire is off. It will drive at 30%~40% of the normal speed, so as to avoid helpless when vehicles get stuck.

雙模一鍵通---有意識轉換

    60°相位電機，當霍爾壞掉或霍爾線掉落時，電機產生缺相，先轉動轉把控制器進入堵轉保護狀態3秒鐘后重新調速，便可進入雙模狀態(即無霍爾狀態)并保持正常行駛。

    120°相位電機，當霍爾壞掉或霍爾線掉落時，電機產生缺相，松開調速把重新調速，便可進入雙模狀態(即無霍爾狀態)并保持正常行駛。

   當調速把出現故障或調速線掉落時或剎把失靈處于剎車狀態時重新打開電門按下一鍵通按鈕，電機速度可保持正常速度的30%-40%速度行駛，從而不會引起車輛拋錨時的無助。

Dual-mode one key (conscious conversion)

60° phase motor, when hall is damaged or its wire is off, the motor will be lack-phase. Rotating the handle controller to the state of locked rotor protection for 3 seconds, so as to enter dual-mode state (hall-free state) and keep proper drive.

60° phase motor, when he hall is damaged or its wire is off, the motor will be lack-phase. Loosen the speed adjusting handle and re-adjust the speed, so as to enter dual-mode state (free-hall state), and keep proper drive.

When the speed adjusting handle has error or its wire is off, or the brake bar fails to work, turn on the power again, and press one key button, it will drive at 30%~40% of the normal speed, so as to avoid helpless when vehicles get stuck.